Samsung sync master 2493HM help

[ivtec]

Hi guys;i have a Samsung Sync Master 2493Hm and it works great but i have an issue when using it connected to my Win 10 I5 ATI video card HD on any Video streaming ,i use HDMI or DVI ,it plays video fine for a few minutes and then monitor turns itself off,i have to power of and on for the pic to come on,i have the manual and it says monitor is 1920x1200 maybe that's the issue?on page 85'' it satates;

Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while
the power LED is on. Refer to the video card manual and adjusts the screen as follows.
Specifications

Maybe that' s my issue; please advise,thanks




https://cdn.badcaps-static.com/pdfs/...65f53c1d9d.pdf

[euromatlox]

Re: Samsung sync master 2493HM help

It might be something about power management or power state. Something about that with Windows 7 in this URL:

https://www.sevenforums.com/tutorial...f-windows.html

It of course might be buggy drivers (display and/or power management) causing problems.

I personally had power related problems with Nvidia GT 710 in an old motherboard. Currently it has installed an older Nvidia 8600GTS and no such problems. That 8600GTS uses older generation drivers.