I can get the last japanese wet ultra-low ESR lytics still produced, anybody wants?

**Behemot** · 06-29-2015, 12:11 PM

I can get brand new, fresh and genuine Sanyo WG (new batch just for me) from trustworthy distributor, to my knowledge the last japanese ultra-low ESR wet electrolytics still being produced.

I asked for 3300/6,3, 1800/6,3 D8, 1800/16 and 1000/16 D8, all are available.

Can do group buy but as people fucked me over last time with Chemi-Cons KZN 3300/16 and here I would need to pay in front, money first and than caps in 4 months or so otherwise no deal.

**Behemot** · 10-29-2015, 03:45 PM

The MOQ is 1000. If you people manage to pre-pay at least 300, I am going for that.

While not the best, these are probably the last ultra-low ESR wet lytics still being produced so take now or cry later there are only milions of fleebay fakes available on the whole planet.

**ReeceyBurger123** · 10-29-2015, 03:47 PM

You still got any Rs 3300uf 16v ?

**Behemot** · 10-29-2015, 03:55 PM

Yes I got plenty of those…but they are not really motherboard-grade ultra-low ESR caps right

**mariushm** · 10-29-2015, 05:33 PM

Why don't you contact Suncon and order straight from them ... it's same factory, same stuff, even the same series is still available : http://www.sunelec.co.jp/eng/product/product_02.html

Any "Sanyo" electrolytic capacitor will be years old no mater what the distributor says.

**Behemot** · 10-29-2015, 06:56 PM

Where do you think it is from? Sanyo, Sunelec, all the same for me.

Fabs don't sell to small buyers.

**ChaosLegionnaire** · 10-30-2015, 05:48 AM

hmm i might be interested in those small 820 or 1000µF 6.3v 8x11.5mm WGs used for filtering scattered around mobos. may need around 40 if price is right. got milk? keke...

**Behemot** · 10-30-2015, 06:05 AM

I got a stock of some old Rubycons MBZ, manufactured 0522. They are somewhat custom but believable, most likely disposed old stock from some manufacturer. Found no evidence of them being fakes, all measure fine, if they were china crap they would be already bulging after 10 years in storage

You might reform them if you do that stuff, I never did and everything works fine till this day. Check stock. Just a notice, the electrodes are cut for D10 holes so you need to straighten them with pliers for D8 holes.

So these are the ones don't really need

06-29-2015, 12:11 PM	#1
Behemot Badcaps Veteran Join Date: Dec 2009 City & State: Prague, 50°4'52.22"N, 14°23'30.45"E My Country: CZ Line Voltage: 230 V/50 Hz I'm a: Knowledge Seeker Posts: 4,786	I can get the last japanese wet ultra-low ESR lytics still produced, anybody wants? I can get brand new, fresh and genuine Sanyo WG (new batch just for me) from trustworthy distributor, to my knowledge the last japanese ultra-low ESR wet electrolytics still being produced. I asked for 3300/6,3, 1800/6,3 D8, 1800/16 and 1000/16 D8, all are available. Can do group buy but as people fucked me over last time with Chemi-Cons KZN 3300/16 and here I would need to pay in front, money first and than caps in 4 months or so otherwise no deal. __________________ Less jewellery, more gold into electrotech industry! Half of the computer problems is caused by bad contacts Exclusive caps, meters and more! Hardware Insights - power supply reviews and more!

10-29-2015, 03:45 PM	#2
Behemot Badcaps Veteran Join Date: Dec 2009 City & State: Prague, 50°4'52.22"N, 14°23'30.45"E My Country: CZ Line Voltage: 230 V/50 Hz I'm a: Knowledge Seeker Posts: 4,786	Re: I can get the last japanese wet ultra-low ESR lytics still produced, anybody want The MOQ is 1000. If you people manage to pre-pay at least 300, I am going for that. While not the best, these are probably the last ultra-low ESR wet lytics still being produced so take now or cry later there are only milions of fleebay fakes available on the whole planet.

10-29-2015, 03:47 PM	#3
ReeceyBurger123 Never Give Up ! Join Date: May 2014 City & State: Telford My Country: Britain Line Voltage: 240 VAC 50Hz I'm a: Student Tech Posts: 7,248	Re: I can get the last japanese wet ultra-low ESR lytics still produced, anybody want You still got any Rs 3300uf 16v ?

10-29-2015, 03:55 PM	#4
Behemot Badcaps Veteran Join Date: Dec 2009 City & State: Prague, 50°4'52.22"N, 14°23'30.45"E My Country: CZ Line Voltage: 230 V/50 Hz I'm a: Knowledge Seeker Posts: 4,786	Re: I can get the last japanese wet ultra-low ESR lytics still produced, anybody want Yes I got plenty of those…but they are not really motherboard-grade ultra-low ESR caps right

10-29-2015, 05:33 PM	#5
mariushm Badcaps Veteran Join Date: May 2011 City & State: Romania Line Voltage: 230VAC 50Hz I'm a: Hobbyist Tech Posts: 3,720	Re: I can get the last japanese wet ultra-low ESR lytics still produced, anybody want Why don't you contact Suncon and order straight from them ... it's same factory, same stuff, even the same series is still available : http://www.sunelec.co.jp/eng/product/product_02.html Any "Sanyo" electrolytic capacitor will be years old no mater what the distributor says.

10-29-2015, 06:56 PM	#6
Behemot Badcaps Veteran Join Date: Dec 2009 City & State: Prague, 50°4'52.22"N, 14°23'30.45"E My Country: CZ Line Voltage: 230 V/50 Hz I'm a: Knowledge Seeker Posts: 4,786	Re: I can get the last japanese wet ultra-low ESR lytics still produced, anybody want Where do you think it is from? Sanyo, Sunelec, all the same for me. Fabs don't sell to small buyers.

10-30-2015, 05:48 AM	#7
ChaosLegionnaire HC Overclocker Join Date: Jul 2012 City & State: Singapore My Country: Singapore Line Voltage: 240VAC 50Hz I'm a: Hobbyist Tech Posts: 3,056	Re: I can get the last japanese wet ultra-low ESR lytics still produced, anybody want hmm i might be interested in those small 820 or 1000µF 6.3v 8x11.5mm WGs used for filtering scattered around mobos. may need around 40 if price is right. got milk? keke...

10-30-2015, 06:05 AM	#8
Behemot Badcaps Veteran Join Date: Dec 2009 City & State: Prague, 50°4'52.22"N, 14°23'30.45"E My Country: CZ Line Voltage: 230 V/50 Hz I'm a: Knowledge Seeker Posts: 4,786	Re: I can get the last japanese wet ultra-low ESR lytics still produced, anybody want I got a stock of some old Rubycons MBZ, manufactured 0522. They are somewhat custom but believable, most likely disposed old stock from some manufacturer. Found no evidence of them being fakes, all measure fine, if they were china crap they would be already bulging after 10 years in storage You might reform them if you do that stuff, I never did and everything works fine till this day. Check stock. Just a notice, the electrodes are cut for D10 holes so you need to straighten them with pliers for D8 holes. So these are the ones don't really need Last edited by Behemot; 10-30-2015 at 06:07 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode