Hello everyone,
I have this board, x453ma rev 2.0
Power LED turns on and off inmediatly after pressing power button.
I measured all the voltage on UP1589Q, attached image.
How may I know if this IC is ok?
No voltage (3.3v, 5v) on output coils.
Any help or tips on this is very much appreciated.
Thank you
I have this board, x453ma rev 2.0
Power LED turns on and off inmediatly after pressing power button.
I measured all the voltage on UP1589Q, attached image.
How may I know if this IC is ok?
No voltage (3.3v, 5v) on output coils.
Any help or tips on this is very much appreciated.
Thank you
Comment