I have this HP ProLiant ML10 motherboard which is bricked as of now. This has a 10 pin front panel. For me its usually the 6 and 8 pin that needs to be shorted to start your mobo.
This is a server motherboard so its bit different I assume, does anyone know which pins needs to be shorted to imitate switching of power button?
I have attached the pics if that helps.
P.S - Pin number 8 is not connected to ground.
Also is there a schematic available for the same ?
This is a server motherboard so its bit different I assume, does anyone know which pins needs to be shorted to imitate switching of power button?
I have attached the pics if that helps.
P.S - Pin number 8 is not connected to ground.
Also is there a schematic available for the same ?
Comment