Announcement

Collapse
No announcement yet.

please help toshiba c850 no display

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    please help toshiba c850 no display

    toshiba c850
    plf/plr/csf/csr rev :2.1

    no display but it work in crt conn
    when i connected to lcd monitor (crt ) work good and data and boot win

    but there is no data on it's monitor
    i changed screen but no new
    i changed i/o but no new
    reprogram bios but no new

    any another way ???
    Last edited by ayooon_2010; 03-11-2019, 11:29 PM.

    #2
    Re: please help toshiba c850 no display

    You have to check your LVDS connector CN3000
    Pin 1 2 3 23 24 25 voltage You have to remove the motherboard for the Lap
    Attached Files
    Last edited by Techtiger; 03-12-2019, 01:00 AM.

    Comment


      #3
      Re: please help toshiba c850 no display

      Check this link that have boardview file, seem close with your board.

      https://www.badcaps.net/forum/showpo...32&postcount=2

      Comment


        #4
        Re: please help toshiba c850 no display

        Originally posted by techtiger View Post
        You have to check your LVDS connector CN3000
        Pin 1 2 3 23 24 25 voltage You have to remove the motherboard for the Lap
        thanks for help

        pin 1 = 0 v,
        pin 2 = 18v

        pin 3 =3.3 v

        pin 23 and 24= 0v


        motherboard out lap

        Comment


          #5
          Re: please help toshiba c850 no display

          Originally posted by on/off View Post
          Check this link that have boardview file, seem close with your board.

          https://www.badcaps.net/forum/showpo...32&postcount=2
          thanks for you

          Comment


            #6
            Re: please help toshiba c850 no display

            Originally posted by ayooon_2010 View Post
            thanks for help

            pin 1 = 0 v,
            pin 2 = 18v

            pin 3 =3.3 v

            pin 23 and 24= 0v


            motherboard out lap
            your voltages are not correct
            pin 1.2 should be 3.3V
            pin 3 ok
            pin 23 24 19V
            pin 25 3.3V

            find out Q3000 test the pin S D G (pin 1 2 3)
            FOR PIN 23 & 24 find the PAD6000 test voltage that point you should get 19V
            Upload a pic of the LVDS connector

            Comment


              #7
              Re: please help toshiba c850 no display

              High res image:
              Attached Files

              Comment


                #8
                Re: please help toshiba c850 no display

                Originally posted by ayooon_2010 View Post
                thanks for help

                pin 1 = 0 v,
                pin 2 = 18v

                pin 3 =3.3 v

                pin 23 and 24= 0v


                motherboard out lap
                AYOOON
                the Schematic I have send doesn’t match for you Mob on/off have send you the correct one let's test again from the beginning
                Last edited by Techtiger; 03-13-2019, 03:22 AM.

                Comment


                  #9
                  Re: please help toshiba c850 no display

                  Originally posted by on/off View Post
                  High res image:
                  thanks ON:/OFF for the bordview
                  cant open the file need help
                  Attached Files
                  Last edited by Techtiger; 03-13-2019, 03:32 AM.

                  Comment


                    #10
                    Re: please help toshiba c850 no display

                    Originally posted by on/off View Post
                    Check this link that have boardview file, seem close with your board.

                    https://www.badcaps.net/forum/showpo...32&postcount=2
                    cant open this also need help

                    Comment


                      #11
                      Re: please help toshiba c850 no display

                      Just extract it first, then drag and drop any file with extension .ASC (whatever you choose on folder TODs) on your favorite boardviewer software.

                      Comment


                        #12
                        Re: please help toshiba c850 no display

                        Originally posted by techtiger View Post
                        AYOOON
                        the Schematic I have send doesn't match for you Mob on/off have send you the correct one let's test again from the beginning
                        i cant open on/of file

                        the photo u asked











                        thanks

                        Comment


                          #13
                          Re: please help toshiba c850 no display

                          Originally posted by on/off View Post
                          Just extract it first, then drag and drop any file with extension .ASC (whatever you choose on folder TODs) on your favorite boardviewer software.
                          really thanks on/off

                          Comment


                            #14
                            Re: please help toshiba c850 no display

                            Originally posted by on/off View Post
                            Just extract it first, then drag and drop any file with extension .ASC (whatever you choose on folder TODs) on your favorite boardviewer software.
                            Thanks on/off working

                            Comment


                              #15
                              Re: please help toshiba c850 no display

                              test LVDS connector J4501
                              pin 1 2 4 38 39 40

                              Comment

                              Working...
                              X