Does anyone know much about ultrasonic baths?
I got one here at work, a NEY Ultrasonik 2QT/H, was in the trash, lovely smell of "magic smoke" having recently been emitted. Might have been the Engineering Dept that dumped it.
Anyway, the sonic and heating lights on the front come on when plugged in and switched on, but no familiar noise I'd expect (like the sound effects from old Flash Gordon tv series of the 30's).
Opened it up, and see some remains of something that was on the piezoelectric device on the underside of the bath, but not sure what it was, the red wire seems long enough to go where it was originally soldered. And a couple of RIFAs on the mainboard, but they're still intact.
Would there normaly be some component connected where the debris is?
I got one here at work, a NEY Ultrasonik 2QT/H, was in the trash, lovely smell of "magic smoke" having recently been emitted. Might have been the Engineering Dept that dumped it.
Anyway, the sonic and heating lights on the front come on when plugged in and switched on, but no familiar noise I'd expect (like the sound effects from old Flash Gordon tv series of the 30's).
Opened it up, and see some remains of something that was on the piezoelectric device on the underside of the bath, but not sure what it was, the red wire seems long enough to go where it was originally soldered. And a couple of RIFAs on the mainboard, but they're still intact.
Would there normaly be some component connected where the debris is?
Comment