Announcement

Collapse
No announcement yet.

Optiquest Q19WB Monitor

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Optiquest Q19WB Monitor

    2 seconds to black, saw the older threads, but how do I get the back off this thing? There is a padlock graphic on the back with a "K" beside a slot. Pushed in with a screwdriver but nothing popped open, no sign of screws either.

    I'd like to have a look inside before I scrap this as it was working well. The other day gave a scrambled image on boot up, restarted fine. Then yesterday 2 seconds to black.

    #2
    Re: Optiquest Q19WB Monitor

    It comes apart from the front, use this piece of plastic to pry up the bezel (where I point with the screw driver) and then work your way around.
    Attached Files
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment


      #3
      Re: Optiquest Q19WB Monitor

      That padlock with the K is a kensington security slot, used to attach a security cable.

      Comment


        #4
        Re: Optiquest Q19WB Monitor

        Thanks budm and R J!

        Comment

        Working...
        X