I valued ventilated case over a solid one (little holes all over, including top), and my son naturally spilled water over case, destroying a MB.
Very little amount of water managed to MB, but it turned off immediately, of course he tried to power it on few times after that before calling me.
Board is tested dead, no quarter sppin or anything, with a working PSU from another machine. Now, I found a MOSFET (73T03GH) in CPUVcore which is shorted all-over (D to G to S), and I wonder
Other MOSFETS look good on board. What are the chances that this is the only problem, and could it kill the CPU?
Any way to verify it w/o another MOSFET?
I found them in China only, involving month or so shipping.
It's hard for me to find any way to test, because even if I pull it out, any measurements I make alredy give so small readings, CPUVcore being low-resistance load as it is.
Very little amount of water managed to MB, but it turned off immediately, of course he tried to power it on few times after that before calling me.
Board is tested dead, no quarter sppin or anything, with a working PSU from another machine. Now, I found a MOSFET (73T03GH) in CPUVcore which is shorted all-over (D to G to S), and I wonder
Other MOSFETS look good on board. What are the chances that this is the only problem, and could it kill the CPU?
Any way to verify it w/o another MOSFET?
I found them in China only, involving month or so shipping.
It's hard for me to find any way to test, because even if I pull it out, any measurements I make alredy give so small readings, CPUVcore being low-resistance load as it is.
Comment