Hello
got this board with a broken DC connector. does not post.
Found a burned resistor in the Power Supply ID line burned.
Basically the symptom is that board turns on, keys light up, and shuts off few secs after.
Power supply goes up to 1.2 amps, and drops to 0, as seen in video
https://drive.google.com/file/d/1W5X...ew?usp=sharing
I believe the broken DC in connector caused the problem, and the burned resistor in the PS_ID line, confirms something went wrong on that line. something 19v wrong
Has anyone the Boardview file so I can check the components on that line?
Most likely the MEC IC was damaged, what do you guys think?
I replaced the resistor, still same behaviour.
If someone can share the boardview would be great.
Theres a post with a file, but seems corrupted as I cannot open it with any boardview program
Thanks for any help!
got this board with a broken DC connector. does not post.
Found a burned resistor in the Power Supply ID line burned.
Basically the symptom is that board turns on, keys light up, and shuts off few secs after.
Power supply goes up to 1.2 amps, and drops to 0, as seen in video
https://drive.google.com/file/d/1W5X...ew?usp=sharing
I believe the broken DC in connector caused the problem, and the burned resistor in the PS_ID line, confirms something went wrong on that line. something 19v wrong
Has anyone the Boardview file so I can check the components on that line?
Most likely the MEC IC was damaged, what do you guys think?
I replaced the resistor, still same behaviour.
If someone can share the boardview would be great.
Theres a post with a file, but seems corrupted as I cannot open it with any boardview program
Thanks for any help!
Comment