Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Game Consoles & Other Weird Devices
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 12-16-2013, 08:06 AM   #1
tronik25
New Member
 
Join Date: Dec 2013
City & State: muncie,IN
My Country: USA
I'm a: Knowledge Seeker
Posts: 8
Default Xbox 360 slim(corona V2):A cap by the psu is dented,I need help identifying it

I took a chance & bought a slim listed as parts/repair off ebay for $37 shipped.
The seal didn't appear to be broken or tampered with.I noticed the exaust vent had a couple small cracks in it.The console powered up with no video & audio,showed green then after 3-5 sec went red.

When I was thinking about reflowing the southbridge & xcgpu,I thought I should do the obvious & look really hard for any physical damage.This cap is all I found that had any damage.
I turned the console on probably 26 times total,3 times it came on & froze on the logo screen with a graphics glitch & once it got to the dashboard before doing the same.
From top to bottom the cap reads:
FP
14Pe
471
16
In the last pic,its the one closest to the power cord/psu adapter.Says 12po main right above the bent cap.I googled but couldn't find this cap.Althought its not bent very bad,imo it could still be enough to mess things up.Everything else looks fine on the board.
Attached Images
File Type: jpg cap1.jpg (8.7 KB, 28 views)
File Type: jpg cap2.jpg (10.4 KB, 21 views)
File Type: jpg cap3.jpg (10.3 KB, 21 views)
File Type: jpg cap4.jpg (9.7 KB, 23 views)
File Type: jpg cap5.jpg (8.5 KB, 30 views)
File Type: jpg cap6.jpg (11.6 KB, 21 views)
tronik25 is offline   Reply With Quote
Old 12-16-2013, 08:39 AM   #2
mariushm
Badcaps Veteran
 
Join Date: May 2011
City & State: Romania
Line Voltage: 230VAC 50Hz
I'm a: Hobbyist Tech
Posts: 3,662
Default Re: Xbox 360 slim(corona V2):A cap by the psu is dented,I need help identifying it

Nichicon FP (Functional Polymer)
470 uF (471 = 47 x 10 to the power of 1) , 16v
The exact series can be determined by the 14Pe code but it doesn't matter. Just measure the diameter and pick one of the FPCAP series or Nichicon polymer series and they'll be suitable.

For example any one of these will work fine, provided they'll fit in the area you have (the diameter):

http://www.digikey.com/product-detai...4-1-ND/3768618
http://www.digikey.com/product-detai...019-ND/1136109
http://www.digikey.com/product-detai...114-ND/1662500
http://www.digikey.com/product-detai...4-1-ND/2239227
mariushm is offline   Reply With Quote
Old 12-17-2013, 10:29 PM   #3
tronik25
New Member
 
Join Date: Dec 2013
City & State: muncie,IN
My Country: USA
I'm a: Knowledge Seeker
Posts: 8
Default Re: Xbox 360 slim(corona V2):A cap by the psu is dented,I need help identifying it

Thanks mariushm!I tried to find the exact model & measurements but couldn't find them.It sucks because I don't have a mm to spare in height in this area.A hdd port casing rests right over these.I will try & look more.I seen a fujistu cap on ebay that looked pretty close but it wasent the same code.
tronik25 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 08:40 PM.
Did you find this forum helpful?