Badcaps.net Forum
Go Back   Badcaps Forums > Electronics Theory and Troubleshooting > Troubleshooting TVs and Video Sources
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 08-12-2013, 09:52 PM   #1
aggied
New Member
 
Join Date: Aug 2013
City & State: Pflugerville, TX
My Country: usa
I'm a: Knowledge Seeker
Posts: 3
Default Vizio V032e stuck in standby?

Helping a friend with is 32" LCD that seems to be study in standby. Read a lot of posts but just can't seem to nail it down.

I do know one of the small fuses on the main board is blown, but to be honest I think that was due to tinkering on our part. I had read a small voltage across that fuse before but later on when the alligator clips slipped and sparked it no longer read any voltage.

I know that I have 5v at the pins labeled "5v" on the power board... but that's about all we have so far. We've got alligator clips running across that burnt fuse but still can't get the orange light to go white...

any thoughts? I understand voltages are supposed to be read across the regulators/ Does anyone know the required voltages for this model? Will we even get readings when it is stuck in standby?
Attached Images
File Type: jpg P1050926.JPG (2.36 MB, 5 views)
File Type: jpg P1050928.JPG (2.26 MB, 6 views)
aggied is offline   Reply With Quote
Old 08-14-2013, 09:06 PM   #2
aggied
New Member
 
Join Date: Aug 2013
City & State: Pflugerville, TX
My Country: usa
I'm a: Knowledge Seeker
Posts: 3
Default Re: Vizio V032e stuck in standby?

bump
aggied is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2017
Powered by vBulletin ®
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 01:58 AM.

Did you find this forum helpful?