Rosewill RV-600 power supply shut down PC today.
Tested it using my power supply tester.
12V supplies were 11.8V and -12V was -11.1V
Replaced bulging C12, was a 1000μfd 16V. Replaced with 25V rated cap.
Tweaked up the +12V using the only trim pot on the board. the -12V came up to -11.4.
Cooling fan was close to seized, cleaned/lubed the bearing/shaft.
Reinstalled. Working good.
PC seems much faster after badcap was replaced.
Tested it using my power supply tester.
12V supplies were 11.8V and -12V was -11.1V
Replaced bulging C12, was a 1000μfd 16V. Replaced with 25V rated cap.
Tweaked up the +12V using the only trim pot on the board. the -12V came up to -11.4.
Cooling fan was close to seized, cleaned/lubed the bearing/shaft.
Reinstalled. Working good.
PC seems much faster after badcap was replaced.