Need a little help here. Plugged in USB C tester. Getting 20V and 0.06Amp.
Starts at 5.00+Volts then jumps to a steady 20V but no Amps jump. I looked for power rails and G3H is present. Tested 1V0 Rails at PP1V0_SUS and I am not getting Voltage at all points. This is the first rail I am testing and nothing is showing. Tested the board for heat and there is no heat emitting from the CPU. Dead CPU atm. Can someone pinpoint me what area I should be testing! Any help would be appreciated thanks!
Starts at 5.00+Volts then jumps to a steady 20V but no Amps jump. I looked for power rails and G3H is present. Tested 1V0 Rails at PP1V0_SUS and I am not getting Voltage at all points. This is the first rail I am testing and nothing is showing. Tested the board for heat and there is no heat emitting from the CPU. Dead CPU atm. Can someone pinpoint me what area I should be testing! Any help would be appreciated thanks!
Comment