Hi, anyone knows how to check this psu is good or not? There is no light when press the button at the psu there
Attached Files
-
Last edited by vampy999; 01-02-2021, 09:41 PM. -
Re: dell d1500ef-00
Look at the board and see what marking are on it
See if you see a power ON power GOOD 12 volt 5 volt 3.3 volt and the normal ATX switching power supply markings if it does then hook the power ON to a ground wire and it should turn but you might have to load the 5 volt rail
If not then someone else will need to help you with it9 PC LCD Monitor
6 LCD Flat Screen TV
30 Desk Top Switching Power Supply
10 Battery Charger Switching Power Supply for Power Tool
6 18v Lithium Battery Power Boards for Tool Battery Packs
1 XBox 360 Switching Power Supply and M Board
25 Servo Drives 220/460 3 Phase
6 De-soldering Station Switching Power Supply 1 Power Supply
1 Dell Mother Board
15 Computer Power Supply
1 HP Printer Supply & Control Board * lighting finished it *
These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%
1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
2 Hem Saw Computer Stack Board
All of these had
CAPs POOF
All of the mosfet that are taken out by bad caps
Comment