Got this off ebay for £1, came with a heatsink and amd sempron 140.
http://www.foxconnchannel.com/Produc...U=en-us0000467
She said it worked fine one day and not the next.
When i got it the cpu pins were bent, I have bent them back and tried the cpu in my motherboard and it works fine, i have also tried my x6000 cpu in the foxconn but it still wont boot up.
I get no beeps.
The cmos battery was dead, and it doesnt charge up when left in the socket.
Tried a known good cmos battery and known good psu but still the same.
It is an amd chipset board.
All caps "look" ok.
Any ideas before I stick it in the oven?
Cpu, south and north bridge get warm when on, so they are receiving power.
http://www.foxconnchannel.com/Produc...U=en-us0000467
She said it worked fine one day and not the next.
When i got it the cpu pins were bent, I have bent them back and tried the cpu in my motherboard and it works fine, i have also tried my x6000 cpu in the foxconn but it still wont boot up.
I get no beeps.
The cmos battery was dead, and it doesnt charge up when left in the socket.
Tried a known good cmos battery and known good psu but still the same.
It is an amd chipset board.
All caps "look" ok.
Any ideas before I stick it in the oven?
Cpu, south and north bridge get warm when on, so they are receiving power.
Comment