Hot air machine question.

[Malachi]

What temperature do i set my hot air machine to desolder 30f301 fets?
I have a tnpa5335 to repair.
Previously I used a heat gun but I bought a hot air station a while back. Figured I may as well get it out of the box.

[petehall347]

Re: Hot air machine question.

should tell you on device data sheet .

[Malachi]

Re: Hot air machine question.

What device data sheet?

[diif]

Re: Hot air machine question.

The temperature you set it at isn't necessarily the temperature you'll have on the board.
Get a scrap board and play with the temperatures and air speed settings.

[Malachi]

Re: Hot air machine question.

The temperature you set it at isn't necessarily the temperature you'll have on the board.
Get a scrap board and play with the temperatures and air speed settings.

Ok thanks. Any starting point?

[diif]

Re: Hot air machine question.

I'd guess around 330-340c. Maybe check YouTube to see if there are any tutorials for your station to give you a better idea.

[Malachi]

Re: Hot air machine question.

Ok thanks. Btw, don’t you brits sleep? Lol

[diif]

Re: Hot air machine question.

Yeah, sometimes.