Announcement

Collapse
No announcement yet.

Clevo N150SD powers on for 10 secs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #41
    Re: Clevo N150SD powers on for 10 secs

    Originally posted by piernov View Post
    You are using a known good DDR3L RAM stick right?

    If it still has VCore but is not POSTing, you can probe BIOS CS# pin with the oscilloscope and LPC bus too (on LFRAME#) to see if there's any activity but it won't help much anyway. It can be almost anything, EC, PCH, CPU, maybe GPU, random stuff going on somewhere…

    I'd try another known good BIOS.
    Yes, I'm using a known good DDR3L RAM stick, I have even tried a second known good DDR3L RAM stick with no difference.

    I don't have an oscilloscope for that.

    Could I try a basic reflow with my SMD gun on one of the main chips?

    I haven't been able to find any bios for this model apart from the one linked by SMDflea that I have tried.
    Last edited by Johndill; 04-27-2019, 09:46 PM.

    Comment


      #42
      Re: Clevo N150SD powers on for 10 secs

      voltage on u20 and u22 after pressing power on?

      Comment


        #43
        Re: Clevo N150SD powers on for 10 secs

        Originally posted by dellxps15 View Post
        voltage on u20 and u22 after pressing power on?
        Tested and working from page 1 in post #3.

        Comment


          #44
          Re: Clevo N150SD powers on for 10 secs

          This board uses DDR3 1.5V RAM doesn`t it ?
          All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

          Comment


            #45
            Re: Clevo N150SD powers on for 10 secs

            Originally posted by SMDFlea View Post
            This board uses DDR3 1.5V RAM doesn`t it ?
            Same result with 1.5V DDR3 and 1.35V DDR3L.

            Comment


              #46
              Re: Clevo N150SD powers on for 10 secs

              What should I do next?

              Comment


                #47
                Re: Clevo N150SD powers on for 10 secs

                Anyone have any ideas?

                Comment


                  #48
                  Re: Clevo N150SD powers on for 10 secs

                  Is this the end of the road? Anyone?

                  Comment


                    #49
                    Re: Clevo N150SD powers on for 10 secs

                    Do you have a Compal POST card, or a scope
                    All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

                    Comment


                      #50
                      Re: Clevo N150SD powers on for 10 secs

                      Originally posted by SMDFlea View Post
                      Do you have a Compal POST card, or a scope
                      I don't have ether, the post card sounds good, is there any particular post card I should get?

                      Comment


                        #51
                        Re: Clevo N150SD powers on for 10 secs

                        I put 3.3V to pin3 & 5 of U10 and the GPU started to warm up so I assume it was powered on but same issue happened.

                        I put some pressure down on the CPU and the CPU fan started working as it never did before but no boot, I heated up the CPU with the heat gun and now the CPU has no Vcore so I assume the CPU is probably dead.

                        Comment

                        Working...
                        X