Announcement

Collapse
No announcement yet.

ga-h61m-s2pv restart .

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    ga-h61m-s2pv restart .

    motherboard restart after second's without data on screen .
    debug card shows code 15 sometimes 53
    i flash the bios
    change ram+cpu+power
    but the problem still exist .


    #2
    Re: ga-h61m-s2pv restart .

    get new board.

    Comment


      #3
      Re: ga-h61m-s2pv restart .

      15 doesn't ring any bell but I think 53 is usually related to RAM.
      Try with other compatible RAM sticks.
      Check and clean RAM slots.
      Check for any broken pin in the CPU socket.
      Make sure CPU is compatible with the board.
      Check RAM supply voltage.
      OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

      Comment


        #4
        Re: ga-h61m-s2pv restart .

        Originally posted by piernov View Post
        15 doesn't ring any bell but I think 53 is usually related to RAM.
        Try with other compatible RAM sticks.
        Check and clean RAM slots.
        Check for any broken pin in the CPU socket.
        Make sure CPU is compatible with the board.
        Check RAM supply voltage.
        thank you
        voltage on pin 236 in ram socket = 2v should be 3.3 because vcc3
        .

        Comment


          #5
          Re: ga-h61m-s2pv restart .

          Originally posted by mo000 View Post
          thank you
          voltage on pin 236 in ram socket = 2v should be 3.3 because vcc3
          .
          Hi did u get tru and figure out the exact issue for your Gigabyte Board?

          Comment

          Working...
          X