I have a fujitsu siemens motherboard with 7 failed rubycon caps, they all have brown goo coming out of them.
The capasitators in question is Rubycon 3300uF 6.3v
I am wondering if this is a good replacement:
PANASONIC - EEUFM0J332 - CAPACITOR, RADIAL, 3300UF, 6.3V
Capacitor Application:Low ESR
More specs here: http://no.farnell.com/panasonic/eeuf...-3v/dp/1219450
Is the quality of this capasitor adequete for my application?
I live in Norway, so i want to buy local.
Also, should i replace the other caps on the board even if they look fine?
The pc would not stay on for more than 5 min.
The capasitators in question is Rubycon 3300uF 6.3v
I am wondering if this is a good replacement:
PANASONIC - EEUFM0J332 - CAPACITOR, RADIAL, 3300UF, 6.3V
Capacitor Application:Low ESR
More specs here: http://no.farnell.com/panasonic/eeuf...-3v/dp/1219450
Is the quality of this capasitor adequete for my application?
I live in Norway, so i want to buy local.
Also, should i replace the other caps on the board even if they look fine?
The pc would not stay on for more than 5 min.
Comment