Hello everyone,
First of all I want to thank all the good professional people at badcaps. I have repair several tv by following all your great technical advises.
Below is my issue:
I have a Samsung 50uhd8550. The standby led is on but pressing the power does not turn it on. I disconnected the connector from the power supply board to main board and the backlights did not come on. I measured the pins on the connector CNM803 and I only gets the following:
PS ON/OFF = 3.5V
A5V = 5V
ALL other pins are showing no volts.
Any help will be appreciated. Thanks in advance.
First of all I want to thank all the good professional people at badcaps. I have repair several tv by following all your great technical advises.
Below is my issue:
I have a Samsung 50uhd8550. The standby led is on but pressing the power does not turn it on. I disconnected the connector from the power supply board to main board and the backlights did not come on. I measured the pins on the connector CNM803 and I only gets the following:
PS ON/OFF = 3.5V
A5V = 5V
ALL other pins are showing no volts.
Any help will be appreciated. Thanks in advance.
Comment