Hello, this unit came as there was no picture on the screen. it takes 1A and stops there, also with debug card it shows DIMM as error. I replaced several rams but still shows DIMM error. Then i checked +vgacore and it was 0v.
19v comes to PU13 which is vgacore chip
5v comes to VDD and VDDP
0v comes to EN/DEM
Motherboard model is: DA0LX6MB6H1 Rev.H
Attach is the pdf schematic.
Any advices welcome. Thanks
19v comes to PU13 which is vgacore chip
5v comes to VDD and VDDP
0v comes to EN/DEM
Motherboard model is: DA0LX6MB6H1 Rev.H
Attach is the pdf schematic.
Any advices welcome. Thanks
Comment