I need help on this please hp mini 210-1018cl board idANM6AMB6F0 REV F: it came dead the problem is the 19v rail at first check pq32 pin has 19v but pin 2 0v and pin3 has 0.9v, so i replaced pq32 it works now there is a light and laptop can turn on and boots fine after a minute it goes dead again check again pq32 same as before no voltage on pin 2 and pin 3 has 0.9v so and check the fuse R030 markings has 0.9v so i replaced the fuse now 19v present and laptop can turn on and boots fine, but still same issue after a minute it goes dead again and no voltages on pq32 and the fuse R030.could anyone help on this please. if a put votages using bench lab on pq32 and R030 FUSE ligts present then goes off and taking 0.01miliamps on bench lab
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
hp mini 210-1018cl 19v rail problem
Collapse
X
-
Re: hp mini 210-1018cl 19v rail problem
change
PU2
ISL6251A
or
pu2 ic islxxxxx numberLast edited by Stevie2001; 06-20-2018, 11:23 AM.
Comment
-
Re: hp mini 210-1018cl 19v rail problem
Originally posted by Romulo View PostI need help on this please hp mini 210-1018cl board idANM6AMB6F0 REV F: it came dead the problem is the 19v rail at first check pq32 pin has 19v but pin 2 0v and pin3 has 0.9v, so i replaced pq32 it works now there is a light and laptop can turn on and boots fine after a minute it goes dead again check again pq32 same as before no voltage on pin 2 and pin 3 has 0.9v so and check the fuse R030 markings has 0.9v so i replaced the fuse now 19v present and laptop can turn on and boots fine, but still same issue after a minute it goes dead again and no voltages on pq32 and the fuse R030.could anyone help on this please. if a put votages using bench lab on pq32 and R030 FUSE ligts present then goes off and taking 0.01miliamps on bench lab
Comment
-
Re: hp mini 210-1018cl 19v rail problem
Originally posted by Stevie2001 View PostDownload board view for your borad or buy one.
Youtube mb boardview learn reflow on short makes no sense
Comment
Comment