Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

viewsonic 2030wm wont go into high resolution

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    viewsonic 2030wm wont go into high resolution

    this monitor only goes to 1024x768 sttings on the screen configuration,if i go higher it will shut off,with a blue on light on all the time.
    anybody can suggest what to check?
    do other different makes of monitors work the same?
    Tags: None
    #2
    Re: viewsonic 2030wm wont go into high resolution

    what causes a new cap to bulge(besides being "el cheapo"?
    i had replaced a 1500mfd,10v cap with a 1500mfd,16v new cap just yesterday and today its bulged.
    what its going on here?
    Attached Files

    Comment

      #3
      Re: viewsonic 2030wm wont go into high resolution

      Originally posted by aortiz View Post
      what causes a new cap to bulge(besides being "el cheapo"?
      i had replaced a 1500mfd,10v cap with a 1500mfd,16v new cap just yesterday and today its bulged.
      what its going on here?
      Probably in the wrong way, LOL.
      ASRock B550 PG Velocita

      Ryzen 9 "Vermeer" 5900X

      16 GB AData XPG Spectrix D41

      Sapphire Nitro+ Radeon RX 6750 XT

      eVGA Supernova G3 750W

      Western Digital Black SN850 1TB NVMe SSD

      Alienware AW3423DWF OLED




      "¡Me encanta "Me Encanta o Enlistarlo con Hilary Farr!" -Mí mismo

      "There's nothing more unattractive than a chick smoking a cigarette" -Topcat

      "Today's lesson in pissivity comes in the form of a ziplock baggie full of GPU extension brackets & hardware that for the last ~3 years have been on my bench, always in my way, getting moved around constantly....and yesterday I found myself in need of them....and the bastards are now nowhere to be found! Motherfracker!!" -Topcat

      "did I see a chair fly? I think I did! Time for popcorn!" -ratdude747

      Comment

        #4
        Re: viewsonic 2030wm wont go into high resolution

        thank you rjarrrpcgp,
        no,thats the first thing i checked, and it was in right.
        i seen them blow a thick acrilic cover to the roof when they are in backwards,of course they were 1000v ,huge sized caps.
        but anyway,all i got right now its those "el cheapo" caps.
        next week we are going back to mcallen tx and i'll order some good quality caps.
        i put another one and i am keeping an eye on it.
        the problem still the same can not adjust past the 1024x768 resdolution and even that went out after 3 hours.
        do you think it can be the power board?
        or the small caps on the logic board?
        Last edited by aortiz; 02-28-2014, 10:12 PM.

        Comment

          #5
          Re: viewsonic 2030wm wont go into high resolution

          Shows us some pictures of the power boards. I suspect just crappy replacement caps, though. Sometimes, it really does pay off to get more expensive higher quality capacitors.

          Comment

            #6
            Re: viewsonic 2030wm wont go into high resolution

            thank you momaka,
            my son took the monitor to his house and used the dvi output and it works fine ,it goes up to max resolution.
            what gives?
            only the vga output does not work.
            Attached Files
            Last edited by aortiz; 03-01-2014, 06:41 PM.

            Comment

              #7
              Re: viewsonic 2030wm wont go into high resolution

              fixed!!!!
              I replaced All the caps with good quality caps and it works like a champ.
              up to the highest resolution
              thank you everybody for your help!!!!!!

              Comment

                #8
                Re: viewsonic 2030wm wont go into high resolution

                Good to hear back that you got it fixed!
                This is exactly why I tell people not to waste their time with crappy caps, even if they only need the fix to be "temporary".

                Comment

                Previous template Next
                Working...
                X