Same thing , motherboard powers up and shuts down after few seconds.
i also tried move onboard jumper to BBR#, after that i get blinking led on
power button , 2 long 2 short , according to HP codes thats bios failure.
A similar problem with bios, there is a working dump with exactly the same pc, I can’t clean me in it, all attempts to clean me turn the device into a "brick", as well as firmware dump from the site’s site
Last edited by SMDFlea; 11-25-2021, 09:00 AM.
Reason: google translate
Hi. Simpler board came
HP slimline
Newark Rev.A
17520-1
348.0AC92.001
Board starts turns Off..
No display.PL40701 no power.Rest all coils have power .
It has IT8991E 128 DXS is it programmable?
Flashed bios from other site, no changes. I will try this bios from this post too.
Comment