Ok so I am still very new at this and wondering if i could get some help pinning this down. No mag , no chime, dead but clean as a whistle inside. I measured around C6422 to look for short to ground, following a prompt in one of the threads here, and suddenly the green light was back. I reinstalled the board, but alas, the green mag light disappeared again. Anyone out there make sense of this? I have power on all the main fuses...
Announcement
Collapse
No announcement yet.
820-3476 2014 A1502 no mag light, no chime,dead?
Collapse
X
-
Re: 820-3476 2014 A1502 no mag light, no chime,dead?
Known good DC-in board and Magsafe2 60W/85W? Both connectors cleaned?
(C6422 has nothing to do with not getting green light on Magsafe)OpenBoardView — https://github.com/OpenBoardView/OpenBoardView
Comment