Need bios hp probook 430 G4

[Siddig]

Need bios for
hp probook 430 G4 bios dump

DA0X81MB6E0
REV:E

thanks

[Siddig]

Re: Need bios hp probook 430 G4

Please I need above bios dump

[nacer]

Re: Need bios hp probook 430 G4

you got it

[Siddig]

Re: Need bios hp probook 430 G4

you got it

Thanks dear
تشكر عزيزي

[predator_vol]

Re: Need bios hp probook 430 G4

Thanks

[mischligaertli]

Re: Need bios hp probook 430 G4

Hi, I would need the password removed from those 2 bios files which are from a HP ProBook 430 G4.
Is there a guide for removing the password? I have another 6 430 G4 where I need the password removed. So I would not want to overstress the community with all those request and do it on my own.
Thanks!

[m-serv]

Re: Need bios hp probook 430 G4

hi all need help for password reset
hp 430 g4
HP Notebook System BIOS Update (P85, P91) 01.32 Rev.A

.thanks in advance

[dgs3342]

Re: Need bios hp probook 430 G4

you got it

this file works, thanks!

[daniel92]

Re: Need bios hp probook 430 G4

Thank bro

[danito]

Re: Need bios hp probook 430 G4

Need bios for
430 G4 bios dump
DA0X81MB6E0
REV:E
or remove psw
thx

[peste]

Re: Need bios hp probook 430 G4

Need bios for
430 G4 bios dump
DA0X81MB6E0
REV:E
or remove psw
thx

try..

[danito]

Re: Need bios hp probook 430 G4

try..

nop capslock&numlk led x5 and fan max
I also made it with hpunlocker

[Umadbro]

Re: HP Probook 440 G4 Working BIOS

Hi, I have a DA0X81MB6E0 REV: E MODEL X81, after liquid damage the machine wouldn't turn on. After clean and repair the machine powers with kb backlight and CAPS&NUM Lock blinking 5 times, black screen.

I suspect it to be bios related. Would someone have a look at my dump file?

Thank you.

[Umadbro]

Re: HP Probook 440 G4 Working BIOS

Anyone?

[SMDFlea]

Re: HP Probook 440 G4 Working BIOS

Anyone?

The serial number in the bios is 5CD7113PDC ,its a 430 G4.Does the serial match the one on the case

[Umadbro]

Re: HP Probook 440 G4 Working BIOS

The serial number in the bios is 5CD7113PDC ,its a 430 G4.Does the serial match the one on the case

Hi SMDFlea, thank you for your interest. I will be able to check it in about 1hour and I will leave the info here.

[Umadbro]

Re: HP Probook 440 G4 Working BIOS

The serial number in the bios is 5CD7113PDC ,its a 430 G4.Does the serial match the one on the case

Yes, that is the right serial and model, just like it is written on the case.

[Umadbro]

Re: Need bios hp probook 430 G4

I followed the instructions and rebuilt the ME Region on my original dump.
I found that my bios ME Version is 11.6.1.1142, and using this link:

"https://www.win-raid.com/t832f39-Intel-CS-ME-CS-TXE-CS-SPS-GSC-PMC-PCHC-PHY-amp-OROM-Firmware-Repositories.html"

I downloaded the correspondent version zip, in my case this file:

"https://mega.nz/folder/PJFXnCDK#lWSX5W0ODubZ2pf3gu3unw"

And I chose "CSME 11.6 Repository r32\11.6.1.1142_CON_LP_C_NPDM_PRD_RGN.bin" file, as it seemed to be the most identical file by the name abbreviations (Consumer LP, SPT/KBP-LP C)

I changed its name to "ME Region.bin" and overwritten the file inside Decomp, in the Intel FIT folder. Built the image, pressing ok in any option ahead.

ME analyzer is now saying the file is "configured" instead of "initialized", so I am to suppose that the ME Region has been fixed properly. But after flash, I get the exact same result, 5 caps&num blinks with a black screen, followed by fast fan spin.

Would you please confirm for me if this file is properly set?

Original - original dump
ME file - file used to fix me region
ME fixed - final image created

Thank you for your support.

[hoaca388]

Re: Need bios hp probook 430 G4

I followed the instructions and rebuilt the ME Region on my original dump.
I found that my bios ME Version is 11.6.1.1142, and using this link:

"https://www.win-raid.com/t832f39-Intel-CS-ME-CS-TXE-CS-SPS-GSC-PMC-PCHC-PHY-amp-OROM-Firmware-Repositories.html"

I downloaded the correspondent version zip, in my case this file:

"https://mega.nz/folder/PJFXnCDK#lWSX5W0ODubZ2pf3gu3unw"

And I chose "CSME 11.6 Repository r32\11.6.1.1142_CON_LP_C_NPDM_PRD_RGN.bin" file, as it seemed to be the most identical file by the name abbreviations (Consumer LP, SPT/KBP-LP C)

I changed its name to "ME Region.bin" and overwritten the file inside Decomp, in the Intel FIT folder. Built the image, pressing ok in any option ahead.

ME analyzer is now saying the file is "configured" instead of "initialized", so I am to suppose that the ME Region has been fixed properly. But after flash, I get the exact same result, 5 caps&num blinks with a black screen, followed by fast fan spin.

Would you please confirm for me if this file is properly set?

Original - original dump
ME file - file used to fix me region
ME fixed - final image created

Thank you for your support.

Try and report. You have selected the correct ME file.

[Umadbro]

Re: Need bios hp probook 430 G4

Try and report. You have selected the correct ME file.

Hi, thank you for your support.

Same result, CAPS&NUM lock blinking 5 times, followed by fast fan spin.