Re: Miller 375 Plasma Burt Cap..
It looks like they used a ceramic resistor originally, 10 ohm
Digikey A102453-ND or TWW5J10RE-ND (5watt); A103695-ND (7 watt); A131255-ND (10 watt)
If that ptc is too large there are likely smaller ones that would work. I was basing it on the 600 volt rating of the miller part.
Ametherm site: https://www.ametherm.com/inrush-current/
It looks like they used a ceramic resistor originally, 10 ohm
Digikey A102453-ND or TWW5J10RE-ND (5watt); A103695-ND (7 watt); A131255-ND (10 watt)
If that ptc is too large there are likely smaller ones that would work. I was basing it on the 600 volt rating of the miller part.
Ametherm site: https://www.ametherm.com/inrush-current/
Comment