Announcement

Collapse
No announcement yet.

Bios XM25QU64 error

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Bios XM25QU64 error

    XM25QU64
    when i read via rt809f verrification failed, error

    #2
    Re: Bios XM25QU64 error

    first check the contacts.and try to apply a little pressure on the chip while reading.

    Comment


      #3
      Re: Bios XM25QU64 error

      Originally posted by bachir2004 View Post
      first check the contacts.and try to apply a little pressure on the chip while reading.
      already tried solder to adapter to make sure, but still the same, maybe i need chip.

      Comment


        #4
        Originally posted by superdota2 View Post
        Re: Bios XM25QU64 error



        already tried solder to adapter to make sure, but still the same, maybe i need chip.
        Have you found any solution? I am experiencing the same problem.

        Comment


          #5
          Is this device supported by your programmer?

          do you have an adapter? This is a 1v8 flash device. Can be damaged if used at 3v3.

          Comment


            #6
            Originally posted by mon2 View Post
            Is this device supported by your programmer?

            do you have an adapter? This is a 1v8 flash device. Can be damaged if used at 3v3.
            Yes I do have an adapter. I used a Winbond 25Q64FWSIG instead and it worked.

            Comment

            Working...
            X