Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Computer Displays
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 09-28-2022, 02:05 AM   #1
Joe Black
eager to learn
 
Joe Black's Avatar
 
Join Date: Sep 2015
City & State: Serbia
My Country: southeastern europe
Line Voltage: 240V
I'm a: Knowledge Seeker
Posts: 146
Default LG 27GL63T-B completely dead

Hello everyone!

Have this fine monitor, which doesn´t give any sign of life.
No LED diode, no reaction whatsoever.
PSU is OK, and there is 19V on both big caps and one pin of backlight connector,
for example.

Now, in these modern things there is only one board and no discreet components at all, so I really can´t start much with it.
Any help would be appriciated

Board no. is EAX68524502(1.1) and there are none selling in Europe

__________________
stay classy
Joe Black is offline   Reply With Quote
Old 11-23-2022, 02:10 PM   #2
unclejoe01
New Member
 
Join Date: Dec 2020
City & State: va
My Country: usa
I'm a: Knowledge Seeker
Posts: 6
Default Re: LG 27GL63T-B completely dead

I have the same monitor, have you had any luck repairing it?
unclejoe01 is offline   Reply With Quote
Old 12-03-2022, 01:08 AM   #3
kylegp
New Member
 
Join Date: Jul 2020
City & State: Australia
My Country: Australia
I'm a: Knowledge Seeker
Posts: 2
Default Re: LG 27GL63T-B completely dead

Same here. Seems to be a common fault for this monitor. I haven't worked out the cause.
kylegp is offline   Reply With Quote
Old 12-04-2022, 06:09 AM   #4
CapLeaker
Leaking Member
 
CapLeaker's Avatar
 
Join Date: Dec 2014
City & State: Atlantic Canada
My Country: Canada
Line Voltage: Ground, 0Hz
I'm a: Hobbyist Tech
Posts: 5,507
Default Re: LG 27GL63T-B completely dead

You got power going to the board, but nothing happens? Check the crystal. If the crystal isn’t working nothing else is either. Check the SPI flash and pull the data sheet. Check if you can update the firmware. Maybe this thing has a TTL port hook up to it and see what happens there. Look at the board and check the little buck converter(s) maybe one is shorted to GND.

These LGs are known for bad HDMI ports and playing dead with LED off. Maybe find a dump and flash it to the SPI. They look good, but that’s about it in my book.
CapLeaker is offline   Reply With Quote
Old 01-24-2023, 08:48 AM   #5
chronic519
New Member
 
Join Date: Feb 2015
City & State: windsor ontario
My Country: canada
I'm a: Knowledge Seeker
Posts: 3
Default Re: LG 27GL63T-B completely dead

Same board, found a shorted cap beside the audio jack. Removed jack, short gone and 3.3 going to cap now. Found it to be the LED was shorted inside the jack. Still not getting LED light to power button. Going to continue search.
chronic519 is offline   Reply With Quote
Old 01-25-2023, 02:54 AM   #6
jiroy
Badcaps Veteran
 
Join Date: Jun 2016
City & State: Beirut
My Country: Lebanon
I'm a: Knowledge Seeker
Posts: 1,893
Default Re: LG 27GL63T-B completely dead

Questions to be asked , did you follow CapLeaker instructions ?
Did you find a schematic ? ..
With no follow up , no high resolution image , no schematic , how can we be of any help ?
Anyway , the only help I can get is this service manual , as it's similar in identifying the culprit ..
Attached Files
File Type: pdf lg 28.pdf (2.31 MB, 5 views)
jiroy is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums © 2003 - 2023
Powered by vBulletin ®
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 07:28 AM.
Did you find this forum helpful?