Announcement

Collapse
No announcement yet.

Led array

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Led array

    Hi all
    Just wondering what you guys use to refit the Led diffusers once you've replaced the bad smd led.

    Thanks

    #2
    Re: Led array

    Originally posted by Rickig View Post
    Hi all
    Just wondering what you guys use to refit the Led diffusers once you've replaced the bad smd led.

    Thanks
    https://www.walmart.com/ip/2pcs-220V...21mm/125800679

    Comment


      #3
      Re: Led array

      Not sure what that's for

      Comment


        #4
        Re: Led array

        Originally posted by Rickig View Post
        Not sure what that's for

        You buy those PTCs and build something like that

        https://www.youtube.com/watch?v=EZVQKEp6jxk

        For Led diffusers i use BISON ADHESIVE PLASTIC
        Last edited by dani502017; 11-08-2018, 01:19 PM.

        Comment


          #5
          Re: Led array

          I just use cheap super glue as an adhesive for the lens. I use a hot air station to remove the old SMD LED.

          Comment


            #6
            Re: Led array

            What temperature is your hot air set to?

            Comment


              #7
              Re: Led array

              To some extent it will depend upon the device and the manufacturers data sheet, I don't really have a temp set in mind for my pace hand tools, but aim for between 260 and 300 degrees if there is a large thermal mass indicated then higher. It all really depends on experience.

              Comment

              Working...
              X