Any idea what ohm this resistor should be?
Reads, in-circuit, 2.2ohm with board disconnected but looking it up should be a 270ohm resistor. My eyes are seeing 4 bands - yellow,violet,brown,gold.
The components either side of it read higher values so don't see the need to remove from the circuit i.e diode, caps and resistors seem ok.
And what wattage is this likely to be? 3W
Thanks
Reads, in-circuit, 2.2ohm with board disconnected but looking it up should be a 270ohm resistor. My eyes are seeing 4 bands - yellow,violet,brown,gold.
The components either side of it read higher values so don't see the need to remove from the circuit i.e diode, caps and resistors seem ok.
And what wattage is this likely to be? 3W
Thanks
Comment