This 17PW26-5 v.3 Vestel psu is giving me real headache... I've got the blinking stdby led simptome, then I checked the voltages and realized that the 24 and 30 V where missing. I decided to replace the caps, but the situation hasn't changed, still had the blinking... Then i replaced the Q803; Q813; Q814 FET's with 2 pcs. of FQP13N50 and one MDF9N50. The 13N50's back was metal plate, but i isolated from the heat sink with special plastic separator and ring so i double checked after replacement also and there was no short of drain pin to the heat sink. I replaced the two diodes also, the D882 and 883 with same MUR460 and the result you can see it in this video... After i plugged in the TV the 3.15A fuse on the panel blown away together with one of the 13N50... What am i missing? The FQP13N50 is not proper replacement for MDF13N50 maybe? Somebaody had this issue on this Vestel PSU?