Hi everyone!
My TV Samsung Plasma got problem with fault: Have sound but no picture and I try to fix it.
After replace Y-SUS board and fixed X-buffer board, it works now.
However, the image have some darkness and sparkle fixed parts.
I have try to adjust Vs, Va and Vsc and I noticed If I increase Vs, the dark part reduce but It comes to limited voltage values and it is so higher than to standard by Factory Recommend (Vs now 219v rather ~205v)
I actually not know which parts I need to take care now, so I need some help from someone?
This is some pictures of its
https://imgur.com/KjE3xg6
https://imgur.com/tPFTQ5d
My TV Samsung Plasma got problem with fault: Have sound but no picture and I try to fix it.
After replace Y-SUS board and fixed X-buffer board, it works now.
However, the image have some darkness and sparkle fixed parts.
I have try to adjust Vs, Va and Vsc and I noticed If I increase Vs, the dark part reduce but It comes to limited voltage values and it is so higher than to standard by Factory Recommend (Vs now 219v rather ~205v)
I actually not know which parts I need to take care now, so I need some help from someone?
This is some pictures of its
https://imgur.com/KjE3xg6
https://imgur.com/tPFTQ5d
Comment