Announcement

Collapse
No announcement yet.

Asus maximums viii hero lga1151 rev 1.01

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Asus maximums viii hero lga1151 rev 1.01

    Looking for pin out of a 6v41538nlg.
    It's a 32pin ic I think controls frequency boards stuck on 00 I have vcore and all other voltages it boot loops 00.
    I don't have anything out of the clock crystal.
    Attached Files

    #2
    Re: Asus maximums viii hero lga1151 rev 1.01

    Check voltages with respect to ground on each pin of clock crystal and post it.

    Comment


      #3
      Re: Asus maximums viii hero lga1151 rev 1.01

      The cystal is connected to 2 pins of that ic.
      There is 0v on both legs of crystal to ground.

      Comment


        #4
        Re: Asus maximums viii hero lga1151 rev 1.01

        Originally posted by Davemack69 View Post
        The cystal is connected to 2 pins of that ic.
        There is 0v on both legs of crystal to ground.
        The boardview is available,if you request it someone might post it.
        All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

        Comment


          #5
          Re: Asus maximums viii hero lga1151 rev 1.01

          Measure both legs in diode test to ground.

          Comment


            #6
            Re: Asus maximums viii hero lga1151 rev 1.01

            There must be a signal in order to activate rtc section to turn the mobo on.

            Comment


              #7
              Re: Asus maximums viii hero lga1151 rev 1.01

              I'll try tonight on scope there was no output on the clock cystal connected to that ic.
              All other crystals are working.
              Board turns on cpu vrm starts and thats it I seem to have all voltages but nothing on that cystal it allows blk overclocking I think?

              Comment


                #8
                Re: Asus maximums viii hero lga1151 rev 1.01

                Originally posted by soumya199929 View Post
                Measure both legs in diode test to ground.
                There's a reading of 0.57v to ground in diode mode on both legs of crystal.
                No wave form at all out of it.

                Comment


                  #9
                  Re: Asus maximums viii hero lga1151 rev 1.01

                  Is this the RTC crystal there's 3 near one I think is pch.
                  Attached Files

                  Comment


                    #10
                    Re: Asus maximums viii hero lga1151 rev 1.01

                    It's fixed
                    Had a ferrite bead on back of board open circuit it fed that ic.
                    Got signal on the crystal now and it's booted to bios😁

                    Comment

                    Working...
                    X