Announcement

Collapse
No announcement yet.

HP ProBook 5330m "ME is in Recovery State..."

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    HP ProBook 5330m "ME is in Recovery State..."

    I recovered bricked 5330m by means of https://www.badcaps.net/forum/showpo...04&postcount=4

    Then filled in missing system parameters using NBDMIFIT (v2.13 iirc)

    But can't work out how to stop "ME is in Recovery State..." on every boot

    Hoping some of the dross from Googling was worthwhile, I subsequently updated BIOS to latest version F.66 rev.A under DOS, and updated ME under Win10 CLI (wouldn't work under DOS) using commands extracted from SP80144.exe

    FWIW, ME update's "FWUpdLcl.exe -f /ME/ME7_5M_UPD_Production.bin -allowsv -y" didn't show any errors

    It's not a show-stopper, just something I'd like to fix
    better to keep quiet and be thought a fool, than to open your mouth and remove all doubt

    #2
    Re: HP ProBook 5330m "ME is in Recovery State..."

    Looks like my ME update did work:

    C:\HP\ProBook5330m\sp80144>FWUpdLcl.exe -fwver

    Intel (R) Firmware Update Utility Version: 7.1.50.1166
    Copyright (C) 2007-2011, Intel Corporation. All rights reserved.


    FW Version: 7.1.91.3272
    NOTE: version corresponds to currently running FW.

    C:\HP\ProBook5330m\sp80144>FWUpdLcl.exe -fwver ME\ME7_5M_UPD_Production.bin

    Intel (R) Firmware Update Utility Version: 7.1.50.1166
    Copyright (C) 2007-2011, Intel Corporation. All rights reserved.

    FW Version of "ME\ME7_5M_UPD_Production.bin": 7.1.91.3272
    better to keep quiet and be thought a fool, than to open your mouth and remove all doubt

    Comment

    Working...
    X