Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > General Electronics Technical Discussion
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 07-09-2018, 06:23 AM   #1
radcliffkaty1
New Member
 
Join Date: May 2018
City & State: Rolling Meadows
My Country: United States
I'm a: Knowledge Seeker
Posts: 7
Default BGA Inspection???

Hello Everyone!!!

Is there anyone who can help me in finding the best method for Inspection of BGAs???

Thanks in advance.
radcliffkaty1 is offline   Reply With Quote
Old 07-09-2018, 09:15 AM   #2
stj
Great Sage 齊天大聖
 
stj's Avatar
 
Join Date: Dec 2009
City & State: Europe
My Country: some shithole run by Israeli agents
I'm a: Professional Tech
Posts: 19,365
Default Re: BGA Inspection???

xray machine.
stj is offline   Reply With Quote
Old 07-09-2018, 02:45 PM   #3
budm
Badcaps Veteran
 
budm's Avatar
 
Join Date: Feb 2010
City & State: S.F. Bay area
My Country: USA
Line Voltage: 120V 60Hz
I'm a: Knowledge Seeker
Posts: 34,091
Default Re: BGA Inspection???

http://esmat.esa.int/Publications/Pu...SA_STM-261.pdf
https://nepp.nasa.gov/DocUploads/D08...Inspection.pdf
__________________
Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956

Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999

Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl

Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/

TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809
budm is offline   Reply With Quote
Old 07-16-2018, 07:44 AM   #4
radcliffkaty1
New Member
 
Join Date: May 2018
City & State: Rolling Meadows
My Country: United States
I'm a: Knowledge Seeker
Posts: 7
Default Re: BGA Inspection???

Quote:
Originally Posted by stj View Post
xray machine.
Thanks, stj!!!

But, isn't it costly for an individual. Because I also found one method for x-ray inspection service. So, can you please help me to review this BGA X-ray Inspection Service provider if you have any idea about this. Iíll be happy if you shares your reviews on this or any other Inspection service to which which you are familiar with.
radcliffkaty1 is offline   Reply With Quote
Old 07-16-2018, 11:43 AM   #5
stj
Great Sage 齊天大聖
 
stj's Avatar
 
Join Date: Dec 2009
City & State: Europe
My Country: some shithole run by Israeli agents
I'm a: Professional Tech
Posts: 19,365
Default Re: BGA Inspection???

yes, it's costly and dangerous - that wasnt your question.

i dont know if your a hobbyist or a director of a big repair company.
stj is offline   Reply With Quote
Old 07-23-2018, 07:11 AM   #6
radcliffkaty1
New Member
 
Join Date: May 2018
City & State: Rolling Meadows
My Country: United States
I'm a: Knowledge Seeker
Posts: 7
Default Re: BGA Inspection???

Quote:
Originally Posted by stj View Post
yes, it's costly and dangerous - that wasnt your question.

i dont know if your a hobbyist or a director of a big repair company.
Yes, that's not my question. At that time, I was thinking to inspect BGA manually, but I found it difficult and then someone suggests me to take services from an external service provider. So, that's why I asked you to review it. I hope you got my point, what I want to say.

And thanks for being here, to help us.
radcliffkaty1 is offline   Reply With Quote
Old 07-26-2018, 05:05 AM   #7
sam_sam_sam
Badcaps Veteran
 
Join Date: Jul 2011
City & State: Sunny Jacksonville FL
My Country: USA
Line Voltage: 120 Volts 60 HZ
I'm a: Knowledge Seeker
Posts: 1,093
Default Re: BGA Inspection???

Quote:
Originally Posted by radcliffkaty1 View Post
I was thinking to inspect BGA manually, but I found it difficult and then someone suggests me to take services from an external service provider. So, that's why I asked you to review it.
I do not have any experience with this type of service so let get this out the way first

I did look at the service provider that you listed in your post earlier

From what I read on there web site I would not have a problem giving them a try

One recommendation I would make is this

If you are mass producing this item

I would do the following if I were doing this

I would send a blank board and see what they would recommend

If you are wanting them to repair a finished product I would send it to them and see what they recommend

What I like about there website is that you have all their contact information
and do not have to go looking for it

This is not say how good there service however I do not think that a company would put all their information on how to get in touched with them if they were a fly by company

This is my thoughts on what you were asking about

I have to find vendors for the company I work for and I use this critical and other factors when selecting a company to buy from or get service from

I hope this helps
__________________
9 PC LCD Monitor
6 LCD Flat Screen TV
30 Desk Top Switching Power Supply
10 Desk Top Power Supply
10 Battery Charger Switching Power Supply for Power Tool
6 18v Lithium Battery Power Boards for Tool Battery Packs
1 XBox 360 Switching Power Supply and M Board
25 Servo Drives 220/460 3 Phase
6 De-soldering Station Switching Power Supply 1 Power Supply
1 Dell Mother Board
15 Computer Power Supply
1 HP Printer Supply & Control Board * lighting finished it *


These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

1 Over Head Crane Current Sensing Board
2 Hem Saw Computer Stack Board

All of these had CAPs POOF
All of the mosfet that are taken out by bad caps
sam_sam_sam is offline   Reply With Quote
Old 07-31-2018, 08:43 AM   #8
radcliffkaty1
New Member
 
Join Date: May 2018
City & State: Rolling Meadows
My Country: United States
I'm a: Knowledge Seeker
Posts: 7
Default Re: BGA Inspection???

Quote:
Originally Posted by sam_sam_sam View Post
I do not have any experience with this type of service so let get this out the way first

I did look at the service provider that you listed in your post earlier

From what I read on there web site I would not have a problem giving them a try

One recommendation I would make is this

If you are mass producing this item

I would do the following if I were doing this

I would send a blank board and see what they would recommend

If you are wanting them to repair a finished product I would send it to them and see what they recommend

What I like about there website is that you have all their contact information
and do not have to go looking for it

This is not say how good there service however I do not think that a company would put all their information on how to get in touched with them if they were a fly by company

This is my thoughts on what you were asking about

I have to find vendors for the company I work for and I use this critical and other factors when selecting a company to buy from or get service from

I hope this helps
Thanks for the help and sharing your valuable time with me.
radcliffkaty1 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums © 2003 - 2018
Powered by vBulletin ®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 01:11 AM.

Did you find this forum helpful?