I recently acquired this tv and when I started troubleshooting I was getting a cycle of clicks and the red blinking light. I then started by simple troubleshooting of unplug Y board. When I unplugged this board I get the cycling to stop. At no point do I get audio or any sign of playback from the DVDs player.
When I first power the set on, I get the top led led2000 on the "logic" or "control" board to flash once and then the led below it led2001 starts flashing.
For my VS voltage when I fire the set on it goes to 209 and then starts fallin steadily and the same with the VA voltage low then nothing. All other voltages seem correct.
I really need some help before I start trying to find and shotgun parts replacement.
When I first power the set on, I get the top led led2000 on the "logic" or "control" board to flash once and then the led below it led2001 starts flashing.
For my VS voltage when I fire the set on it goes to 209 and then starts fallin steadily and the same with the VA voltage low then nothing. All other voltages seem correct.
I really need some help before I start trying to find and shotgun parts replacement.
Comment