Roland KC-300 Works for a bit then goes into severe distortion.
When I put on the bench with my tone generator it was clear at first but when i raised the levels past "5" on input gain and main output it started small distortion at first then when i did a full sweep thru the frequency range it suddenly went to severely distorted.
didn't know if any of you guys had seen one do this, going to try and find the schematic to start testing.
Thanks
When I put on the bench with my tone generator it was clear at first but when i raised the levels past "5" on input gain and main output it started small distortion at first then when i did a full sweep thru the frequency range it suddenly went to severely distorted.
didn't know if any of you guys had seen one do this, going to try and find the schematic to start testing.
Thanks
Comment