hello, I have this LED tv and the screen does not light on when power button pressed
I tested voltage on LED wires and it is ~104, but on the board it is written it should be 208, so I think LED driver chipset is bad, but the problem is that I can't read markings on it, the chip was covered in some sh*t, after I scratched it I was unable to read, so here some pictures
1
2
whole board pics and
the first one is "fe 6n143da 6a0" which I believe is a Capacitor chip
the second one is unreadable which I believe is LED driver chip itself
so my question is - does anybody know the markings?
or maybe you know any other issues or am I wrong?
P.s. stupid photobucket (((( if you need to see pictures in full resolution you need to click download on photobucket using photo link ((((
I tested voltage on LED wires and it is ~104, but on the board it is written it should be 208, so I think LED driver chipset is bad, but the problem is that I can't read markings on it, the chip was covered in some sh*t, after I scratched it I was unable to read, so here some pictures
1
2
whole board pics and
the first one is "fe 6n143da 6a0" which I believe is a Capacitor chip
the second one is unreadable which I believe is LED driver chip itself
so my question is - does anybody know the markings?
or maybe you know any other issues or am I wrong?
P.s. stupid photobucket (((( if you need to see pictures in full resolution you need to click download on photobucket using photo link ((((
Comment