I tried to attach a picture of power supply ,but it will not upload.
I removed a capacitor off a simlar circuit ,it measured 10uF which suprised me .
Pin 2 of the IC seemed to be the supply voltage to the device it was connected to PTH which went nowhere looks like a track inside the PCB is O/C.,I connected pin 2 to pin 2 on the other IC.
Looking at the photo I took of the PSU it looks like the IC is MP1482 ,I could not see this with my eyeglass.
It does look at if it is working ,but I have not fully tested.
It was an absolute pig to work on.
Used to be aTV engineer many years ago .
Barry
I removed a capacitor off a simlar circuit ,it measured 10uF which suprised me .
Pin 2 of the IC seemed to be the supply voltage to the device it was connected to PTH which went nowhere looks like a track inside the PCB is O/C.,I connected pin 2 to pin 2 on the other IC.
Looking at the photo I took of the PSU it looks like the IC is MP1482 ,I could not see this with my eyeglass.
It does look at if it is working ,but I have not fully tested.
It was an absolute pig to work on.
Used to be aTV engineer many years ago .
Barry
Comment