Announcement

Collapse
No announcement yet.

Epson LX-300

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Epson LX-300

    I have 2 old Epson LX-300 dot matrix printers, one with colored ribbon prints normally, the other with black ribbon only, with the same parallel cable Centronics and in the same cpu, prints from the center to the right of the sheet and keeps trying to print, would it be an alignment problem or some sensor?
    Sometimes she starts printing well but then "slides" to the right of the sheet.

    #2
    Re: Epson LX-300

    probably dust/dirt in the sensing.
    it will either have a disc or steel band with slots in it so small you wont see them without a lamp - it uses it to count "pixels" as it moves the carriage.
    or it could be a problem with the led/sensor assembly that it passes through.

    Comment

    Working...
    X