Re: whole new repair / learning world... plasma! Yikes!
thanks...
not sure if I can re-use the old / originals diodes as my "removal" effort might have been "rough" on the body / legs of those... will check or at least compare old to new measurements.
I checked Q661 once any / all components that I could find that were shorted were removed. It appears to be good on the diode scale and resistance checks.
I have to track down some form of 1ohm resistor as I don't have anything that low but hopefully locally will have some non-smd types available. Thanks for this as my "eye guess" wasn't close.
thanks...
not sure if I can re-use the old / originals diodes as my "removal" effort might have been "rough" on the body / legs of those... will check or at least compare old to new measurements.
I checked Q661 once any / all components that I could find that were shorted were removed. It appears to be good on the diode scale and resistance checks.
I have to track down some form of 1ohm resistor as I don't have anything that low but hopefully locally will have some non-smd types available. Thanks for this as my "eye guess" wasn't close.
Comment