Announcement

Collapse
No announcement yet.

How can I convert hp g62 discrete to uma

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Re: How can I convert hp g62 discrete to uma

    Originally posted by memoslar View Post
    Hi, i have DAAX1JMB8C0 with the processor on board. Will it work? I tried except the seventh picture. But its not powers up.

    In 7th stage cant figure out the position of the capacitors.


    I have one difference in picture 2. I had 75 ohm resistors instead of 70 ohm in r497 , r498, r499
    Hi memoslar, Here is your answers:

    1) 7th stage pic-you need to put 470uF capacitor at PC132 and then make a jumper from PC132 positive to Q9 mosfet on pin1

    2) 75 or 70 ohm resistor hardly matters. You can use anything between 60-80 ohm. It will work.

    Boardview was already uploaded by me. Use that to locate components.

    Comment


      #22
      Re: How can I convert hp g62 discrete to uma

      memoslar is it works for you ?

      Comment


        #23
        Re: How can I convert hp g62 discrete to uma

        Originally posted by zgredek44 View Post
        memoslar is it works for you ?
        It works dear as long as you do it correctly. 100% tested by me.

        Comment


          #24
          Re: How can I convert hp g62 discrete to uma

          Thank you very much ! it worked good!! God bless you

          Comment


            #25
            Re: How can I convert hp g62 discrete to uma

            but today i cant remember this, how can i solve this i try to but cant remember .......sorry guys

            Comment


              #26
              Re: How can I convert hp g62 discrete to uma

              Originally posted by razu View Post
              but today i cant remember this, how can i solve this i try to but cant remember .......sorry guys
              ????

              Comment


                #27
                Re: How can I convert hp g62 discrete to uma

                HP 634649-001 G62 -450sv how to CONVERSION Dis To Uma plz help ??
                Attached Files

                Comment


                  #28
                  Re: How can I convert hp g62 discrete to uma

                  Originally posted by mcplslg123 View Post
                  Hi memoslar, Here is your answers:

                  1) 7th stage pic-you need to put 470uF capacitor at PC132 and then make a jumper from PC132 positive to Q9 mosfet on pin1

                  2) 75 or 70 ohm resistor hardly matters. You can use anything between 60-80 ohm. It will work.

                  Boardview was already uploaded by me. Use that to locate components.
                  pc132 capacitor can't need.. plz help

                  Comment


                    #29
                    Re: How can I convert hp g62 discrete to uma

                    Originally posted by mcplslg123 View Post
                    Here is the conversion details+Boardview(without which its very difficult to locate components

                    Enjoy
                    i tried.it is working but no video on vga port and hdmi.my vga problem solved with schema.

                    thanks..

                    Comment


                      #30
                      Re: How can I convert hp g62 discrete to uma

                      Originally posted by memoslar View Post
                      Hi, i have DAAX1JMB8C0 with the processor on board. Will it work? I tried except the seventh picture. But its not powers up.

                      In 7th stage cant figure out the position of the capacitors.


                      I have one difference in picture 2. I had 75 ohm resistors instead of 70 ohm in r497 , r498, r499
                      The DAAX1JMB8C0 with the processor on board has another simplier convertion.

                      Comment


                        #31
                        Re: How can I convert hp g62 discrete to uma

                        hp g62 mb:pm_i_hpc_s mv_mb_v3
                        pj19 open
                        RI55 SHIFT RI51
                        RI53 SHIFT RI56

                        Comment


                          #32
                          Re: How can I convert hp g62 discrete to uma

                          Originally posted by Chieftain View Post
                          The DAAX1JMB8C0 with the processor on board has another simplier convertion.
                          can you please share the simplier convertion for DAAX1JMB8C0

                          Comment


                            #33
                            Re: How can I convert hp g62 discrete to uma

                            it is here

                            https://www.youtube.com/watch?v=PJMQ6ySvTrs

                            Comment


                              #34
                              Re: How can I convert hp g62 discrete to uma

                              Originally posted by teknikbursa View Post
                              this is not the full guide, missing a lot of steps

                              Comment


                                #35
                                Re: How can I convert hp g62 discrete to uma

                                Do you have all the steps?
                                I've done the steps from YouTube, but no video.

                                Comment


                                  #36
                                  Re: How can I convert hp g62 discrete to uma

                                  Originally posted by mcplslg123 View Post
                                  Here is the conversion details+Boardview(without which its very difficult to locate components

                                  Enjoy
                                  This instruction is 100% bullshit.

                                  Comment


                                    #37
                                    Re: How can I convert hp g62 discrete to uma

                                    Originally posted by ilian359 View Post
                                    This instruction is 100% bullshit.
                                    Nope, perhaps your understanding of schematic diagram is. Have succesfully converted atleast 5-6 motherboards.

                                    Comment


                                      #38
                                      Re: How can I convert hp g62 discrete to uma

                                      Originally posted by mcplslg123 View Post
                                      Here is the conversion details+Boardview(without which its very difficult to locate components

                                      Enjoy
                                      Hi, I saw those components to add, can I find them on a g62 motherboard with soldered cpu? Or can you tell me what the components to add are called?

                                      Comment


                                        #39
                                        Re: How can I convert hp g62 discrete to uma

                                        thanxxx

                                        Comment


                                          #40
                                          Re: How can I convert hp g62 discrete to uma

                                          hello how do you solve the problem with vga and hdmi?

                                          Comment

                                          Working...
                                          X