My midi controller which is powered via usb is not powering up. So I opened it up and remove the power board and checked the voltages. On the usb input I get 5 volts and on the V+BUS5D output connection cable to the next board I get 5 volts. So far so good. Now when I connect the power board to the next board the voltage drops to 4 volts on the main power board and also on the second board. I disconnect the second board and now I have 5 volts on the power board by itself. What could be the casue of this symptom?
Announcement
Collapse
No announcement yet.
Midi controller power issue
Collapse
X
-
Re: Midi controller power issue
Any pictures of the boards?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809
Comment
Comment