Announcement

Collapse
No announcement yet.

help indentifying component please

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    help indentifying component please

    hi to all
    i hope someone can help me with this component found on my mouth hydrocleaner. it's china style gadget and coulnd't find what this IC is..
    Device is working with a lithium battery 3.7v and can be charged with usb 5v.
    any hint is really appreciated..
    Attached Files

    #2
    Re: help indentifying component please

    It might be a dual mosfet like a Alpha & Omega AO6402A

    Comment


      #3
      Re: help indentifying component please

      It might be a single mosfet, are pins 1,2,5,6 connected together?
      Is that number 4T6V ? is there a dash above the V ?
      Last edited by R_J; 03-13-2019, 03:29 PM.

      Comment


        #4
        Re: help indentifying component please

        Originally posted by R_J View Post
        It might be a single mosfet, are pins 1,2,5,6 connected together?
        Is that number 4T6V ? is there a dash above the V ?
        hi, thanks for your answer
        YES 1,2,5,6 are connected together on the pcb.
        YES i read 4T6V but coulnd'nt find nothing with this code.
        NO, i can't see any dash above the V.. but on the side there is what seems "1B"

        Comment


          #5
          Re: help indentifying component please

          AFAIK AO6402A single N-channel

          Seem AO6424A:

          Comment


            #6
            Re: help indentifying component please

            That should be the one, AO6424A, What seems to be wrong with it?

            Comment


              #7
              Re: help indentifying component please

              I guess my chosen word went wrong. "seem".

              Come here on Great Forum not only want to learn electronics, but also I've want to learn to be good on conversation/writing on post. Sometimes i didn't really understand if without help g**gle translate, sometime the translator make more worst as well.

              Comment


                #8
                Re: help indentifying component please

                mosfet does not switch on when 3v are applied to gate. so i have no ground to my motor.
                btw thanks to all for the answers.
                i wonder how you could identify this component, since i tried on smd lookup marking codes table and found nothing.
                thanks again

                sometimes our english is not the best i know, (i am not english native too.. ) but i hope we can understand each other
                Last edited by conan981; 03-15-2019, 03:05 AM.

                Comment


                  #9
                  Re: help indentifying component please

                  Mostly 99% work on laptop repair, from there i knowing alpha omega's mosfet. Also have several time see mark with "dash" and number/letter with orientation anticlockwise 90 degree on the end body package. BUT totally newbie at all, that's way reading many threads for learn.
                  Last edited by on/off; 03-15-2019, 04:06 AM.

                  Comment


                    #10
                    Re: help indentifying component please

                    Originally posted by conan981 View Post
                    mosfet does not switch on when 3v are applied to gate. so i have no ground to my motor.
                    btw thanks to all for the answers.
                    i wonder how you could identify this component, since i tried on smd lookup marking codes table and found nothing.
                    thanks again

                    sometimes our english is not the best i know, (i am not english native too.. ) but i hope we can understand each other
                    Just wondering Why the chinnesse stuff put marking on PCB M2 and using mosfet?

                    Comment

                    Working...
                    X