Capacitor Replacement - Quick Question

[spystyle]

Re: Capacitor Replacement - Quick Question

OK I measured them :

16v = 10.3mm diameter (approx) and 21.3 tall (approx)

6.3v = 10.1 diameter (approx) and 16mm tall (approx)

I don't think height is a concern.

Here is the selection of 16v :

https://tinyurl.com/yb978l3s

Here is the selection of 6.3v :

https://tinyurl.com/y9pvmzpl

Can you guys make a recommendation ?

[spystyle]

Re: Capacitor Replacement - Quick Question

I'm thinking "P12343-ND" and "P15335CT-ND" ... I just chose the most expensive, LOL.

[Per Hansson]

Re: Capacitor Replacement - Quick Question

These would work too, if you want to support the site:

https://www.badcaps.net/store/produc...products_id=38

https://www.badcaps.net/store/produc...roducts_id=147

[spystyle]

Re: Capacitor Replacement - Quick Question

OK thanks, I'll gladly support the site.

Winner winner chicken dinner !

$15.07 with shipping.

I'll let you guys know how the surgery goes

[Stefan Payne]

Re: Capacitor Replacement - Quick Question

Mainboards from 2001 have value ? I'll take a look.

Only the highly regarded OC Boards like Abit NF7 V2.0 and things like that.
The normal Standard/OEM ones not really...

[spystyle]

Re: Capacitor Replacement - Quick Question

Overclocking mainboards, cool

I've never dared to overclock anything, LOL.

[Stefan Payne]

Re: Capacitor Replacement - Quick Question

Well, then lets call them high End Boards instead of Overclocking Boards...

Though only a couple are sought after. Like the mentioned Abit, but also many DFI Boards are wanted...

[rugger]

Re: Capacitor Replacement - Quick Question

Doesn't really make much sense to overclock retro motherboards and CPUs, except for the thrill of it I guess.

If you need something faster, you just use or buy something a bit faster