After reading about this capcitor debacle I Noticed my Epox 8rda+ has two bulging caps next to the mosfets, 2200uF ones. Found this site and am seriously thinking about replacing all the caps. What I would like to know from an UK based guys who have done this, where did you get your caps from? I've looked at RS and Farnell but they only have a few caps available in 10mm diameter, most of the larger capacitances start at 12.5mm.
Accoriding to another post on these forum, the required caps for my m/b are:
4 off 2200uF 10v 10mm
6 off 3300uF 6.3v 10mm
6 off 1500uF 6.3v 10mm
8 off 1000uF 6.3v 8mm
1500uF seems a rare size anyway, would it be ok to use 1200 instead?
Accoriding to another post on these forum, the required caps for my m/b are:
4 off 2200uF 10v 10mm
6 off 3300uF 6.3v 10mm
6 off 1500uF 6.3v 10mm
8 off 1000uF 6.3v 8mm
1500uF seems a rare size anyway, would it be ok to use 1200 instead?
Comment