Re: Diode test results show reading both ways
So the main board is sending the PWON to turn on the rest of the power supply but it is not sending the BLON or DIM control signals.
Bottom line: it has nothing to do with the diode you were testing. Your main board is the problem.
When testing diode and it shows conduction both ways, I always need to know the resistance reading.
Originally posted by AcGeorgiegirl
View Post
Bottom line: it has nothing to do with the diode you were testing. Your main board is the problem.
When testing diode and it shows conduction both ways, I always need to know the resistance reading.
Comment