Hello,
I have a Panasonic plasma born December 2007. It recently started giving the 7 blink error code. I followed the flow chart for 7 blinks (attached below) in the troubleshooting guide that I found for this model. With the SC board disconnected as indicated, the TV does not stay on, but instead gives an 8 blink code. I checked the specified voltages and both were present, indicating the SS board was the culprit. I tried a replacement SS board from ShopJimmy, but the problem was the same. A different SC board swap also yielded no difference.
When the SC board is connected, 7 blinks. When it is disconnected, 8 blinks.
Any ideas of other checks I could do?
Thanks,
Matt
I have a Panasonic plasma born December 2007. It recently started giving the 7 blink error code. I followed the flow chart for 7 blinks (attached below) in the troubleshooting guide that I found for this model. With the SC board disconnected as indicated, the TV does not stay on, but instead gives an 8 blink code. I checked the specified voltages and both were present, indicating the SS board was the culprit. I tried a replacement SS board from ShopJimmy, but the problem was the same. A different SC board swap also yielded no difference.
When the SC board is connected, 7 blinks. When it is disconnected, 8 blinks.
Any ideas of other checks I could do?
Thanks,
Matt
Comment