US 220v dual fuse holders?

[xboxhaxorz]

Since US uses 2 pos lines and a neutral i was wondering where i could find a fuse holder that holds 2 so i can fuse each line. Because if a single line is fused and it breaks the device will still have 110v instead of 220v.

[R_J]

Re: US 220v dual fuse holders?

tons on digikey, just check number of circuits (2), then pick your style, but they usually use a dual breaker that has its trip levers tied together so if one side trips both sides disconnect

[stj]

Re: US 220v dual fuse holders?

bit vague there.
are you looking for panel-mount to put on devices?
i'v seen IEC inlets with duel 20mm fuse holders a few times.

[budm]

Re: US 220v dual fuse holders?

Since US uses 2 pos lines and a neutral i was wondering where i could find a fuse holder that holds 2 so i can fuse each line. Because if a single line is fused and it breaks the device will still have 110v instead of 220v.

Is the device using L1, L2, AND Neutral or just L1 AND L2? What kind of the device is it?
Just use Linked Dual breaker to break both Lines at the same time which you should already have in your breaker panel for the 240V appliance..